Andromax C3 (AD6B1H) Bootloop and Dead Solution - Qualcomm HS-USB QDLoader 9008

This is old news but we just collect them here that you may need it in the future. Here we will explain how to unbrick Andromax C3 or full flash. You can only flash Andromax C3 when it state is 9008 mode so, you can flash Andromax C3 through QFIL (QPST).

How to unbrick or repair Andromax C3 bootloop or dead?

1. Download firmware, QPST and necessary file to get it work.
A. Andromax C3_8610_S8_HAIER_AD6B1H_V2_02_20140901_user_new
B. QPST 2.7.422
C. Qualcomm_HS-USB_QDLoader_9008

2.  Extract the firmware, Install the QPST and put the 2(two) files from  C  point to your sdcard.
3. Insert the sdcard to Andromax C3 and attach it to computer and install driver.
4. Open QFIL program (from installed QPST directory).
5. The program should detect Andromax as Qualcomm HS-USB QDLoader 9008. If your Andromax is bootloop it will also enter to 9008 mode because the file inside sdcard.
6. Programmer Path - Browse (then select file from the firmware that you have been download)
7. Then load XLM (2 files)
8. Press "Download" button to start update Andromax C3
9. Wait until it finished

Firmware Andromax C3 (AD6B1H) V2.02 20140901

Share this post