Samsung A5 (SM-A510F) Combination Firmware

SAMSUNG A510F Combination Firmware. Why you need Samsung combination firmware? When other bypass FRP trick failed with free software and paid software, you need to flash your Samsung with combination firmware.

Remember, that you can't use your Samsung after flash with official or original firmware, this mean that Samsung combination firmware only help you to access setting and enable USB Debugging and doing factory reset.

After you reset your Samsung, you have to flash or update it again, and FRP should already removed, always use latest Samsung combination firmware with subscribe our blog.

Samsung A5 Combination Firmware Update Steps:

1. You need to download Samsung Combination Firmware, Samsung Original Firmware, Samsung Driver and Samsung Odin
2. Prepare all pre-requested file and software (install or extract them)
3. Put your Samsung device in download mode by press volume up + home and power on
4. Attach to PC and install driver (if needed) then open Odin software
5. Load Combination firmware at PDA/AP tab and press "Start" button to update Samsung
6. Wait until update finish and it should restarted after update finish
7. Now you can use your phone at factory binary stage (you can enable USB debugging and factory reset)
8. After all done, you need re-flash again with original firmware so, you can use phone normally

http://mgkencana.blogspot.com/p/samsung-combination-firmware.html

COMBINATION_A510FXXU1AOL7

COMBINATION_A510FXXU2APC2

COMBINATION_A510FXXU2APG1

Share this post